Manual Chain Hoist

H-Lift Chain Hoist: Robust all steel construction, capacities from 500 kgs up to 20 tons. All rotating components mounted on roller of ball bearings to reduce friction and increase efficiency. Fully enclosed automatic load brake with asbestos free friction discs. Fully enclosed stamped steel housing allows also outdoor use. The drop forged suspension and load hooks that yield under overload instead of breaking are made from non-ageing, high tensile steel. The hooks are fitted with robust safety latches and are free to rotate 360 degrees. Two stage reduction gear. Hardened gears and pinions are roller bearing supported, thus increasing efficiency Hardened load sheave with four precision machined chain pockets. Roller bearings for smooth operation and low wear Hand chain cover and slots accurately guide the hand chain Two guide rollers and one chain stripper ensure accurate alignment of the load chain over the load sheave. G-80 zinc plated RUD chain from Germany or FEC chain from Japan available upon request. Overload protection device is available upon request, the device can be fitted at a later date without problem. H-LIFT chain hoist is factory tested with overload. Test certificate is available with serial number and EC declaration of conformity. ModelCHE005CHE010CHE015CHE020CHE030CHE050CHE100CHE200Capacity (ton)0.511.52351020Standard Lift (m)2.52.52.533333Running Test Load (Kn)7.51522.5304575150250Effort Required to Lift Max. Load (N)231309320360340414414828Headroom(Drawn close up) Hmin (mm)270317399414465636798890No. of Falls of Load Chain11112248Load Chain Diameter (mm)66888101010Dimensions (mm)A131140161161161186207215B127158187187210253398650C270317399414465636798890Hook opening3034384148526485Net Weight (kg)101218.5202945.583193Extra Weight per Meter Extra Lift (kg)1.71.72.32.33.75.69.719.4